17-4PH /15-5PH Stainless Steel Sheet/Plate
Short Description:
Standard:ASTM A693 Materials: 17-4PH 17-7PH 15-5PH AISI630 AISI 631 Grade Chemical Component % C Cr Ni Mn P S Mo Si Cu N Other PH Stainless Steel-BEALL 630 17-4PH ≤0.07 15.50-17.50 6.50-7.50 ≤1.00 ≤0.035 ≤0.030 - ≤1.00 3.00-5.00 - Nb 0.15-0.45 631 17-7PH ≤0.09 16.00-18.00 6.50-7.50 ≤1.00 ≤0.035 ≤0.030 - ≤1.00 ≤0.50 - Al 0.75-1.50 632 0Cr15Ni7Mo2Al ≤0.09 14.00-16.00 6.50-7.50 ≤1.00 ≤0.035 ≤0.030 2.00-3.00 ≤1.00 - - Al 0.75-1.50 Thickness: Cold Rolled:1m...
Product Detail
FAQ
Product Tags
Standard:ASTM A693
Materials:
17-4PH 17-7PH 15-5PH
AISI630 AISI 631
| Grade | Chemical Component % | ||||||||||||
| C | Cr | Ni | Mn | P | S | Mo | Si | Cu | N | Other | |||
| PH Stainless Steel-BEALL | 630 | 17-4PH | ≤0.07 | 15.50-17.50 | 6.50-7.50 | ≤1.00 | ≤0.035 | ≤0.030 | - | ≤1.00 | 3.00-5.00 | - | Nb 0.15-0.45 |
| 631 | 17-7PH | ≤0.09 | 16.00-18.00 | 6.50-7.50 | ≤1.00 | ≤0.035 | ≤0.030 | - | ≤1.00 | ≤0.50 | - | Al 0.75-1.50 | |
| 632 | 0Cr15Ni7Mo2Al | ≤0.09 | 14.00-16.00 | 6.50-7.50 | ≤1.00 | ≤0.035 | ≤0.030 | 2.00-3.00 | ≤1.00 | - | - | Al 0.75-1.50 | |
Thickness:
Cold Rolled:1mm-6mm
Hot rolled: 3.0mm-180mm
Width: 1000/1219/1500/2000/2200/2500mm
Surface: Pickled, No.1, Polished,etc
CONDITION
First option : material in hot rolled condition
2nd option, any below condition;
· condition A (solution condition),
· Condition 900
· Condition 925
· Condition 1025
· Condition 1075
· Condition 1150
FAQ Content
