17-7PH

17-7PH

Short Description:

17-7PH Stainless Steel 17-7stainless steel( 631 ) is a chromium-copper precipitation hardening stainless steel material used for applications requiring high strength and a moderate level of corrosion resistance. High strength is maintained to approximately 600 degrees Fahrenheit (316 degrees Celsius). General Properties Stainless steel Alloy 17-7 PH is a precipitation hardening martensitic stainless steel with Cu and Nb/Cb additions. The grade combines high strength, hardness (up to 572°F / 3...


Product Detail

FAQ

Product Tags

17-7PH Stainless Steel

17-7stainless steel( 631 ) is a chromium-copper precipitation hardening stainless steel material used for applications requiring high strength and a moderate level of corrosion resistance. High strength is maintained to approximately 600 degrees Fahrenheit (316 degrees Celsius).

General Properties

Stainless steel Alloy 17-7 PH is a precipitation hardening martensitic stainless steel with Cu and Nb/Cb additions. The grade combines high strength, hardness (up to 572°F / 300°C), and corrosion resistance.

Mechanical properties can be optimized with heat treatment. Very high yield strength up to 1100-1300 MPa (160-190 ksi) can be achieved.

The grade should not be used at temperatures above 572°F (300°C) or at very low temperatures. It has adequate resistance to atmospheric corrosion or in diluted acids or salts where its corrosion resistance is equivalent to Alloy 304 or 430.


  • Previous:
  • Next:
  • FAQ Content

  • Related Products